CLUTCH BLOCK ROTAX DD2 CRANK LOCK

SENZO ROTAX MAX CLUTCH PULLER

TOOLBOX WITH KIT FK

1 x toolbox 1 x sticker kit & fitting instructions

CARB PRESSURE TESTER

PIN GAUGES FOR CARB JETS 0.45 - 1.50 MM...

0.45 - 1.50 MM (0.05 MM)

BOX SPARKPLUG HOLDER

CHAINCUTTER 215 CHAINS

OMP MECHANIC APRON

NEWLINE CYLINDER COVER FOR COLD WEATHER

PLUGHOLE CAP PLASTIC

Soft plastic cap. Prevents dust and dirt inside engine

FUEL PIPE FITTING THIN CLIP

PLUGSPANNER STANDARD ( 21 MM)

PLUGSPANNER SMALL PLUG ( 16 MM)

TOOL ENGINE SPROCKET EXTRACTOR 100 - 125 CC

Easier removal of engine sprocket

PULLER FOR ROTOR IGNITION PVL

TOOL KIT TO REMOVE REAR AXLES

30/40/50 MM

PLUG CAP SECURITY TIE FOR ALL SMALL PLUGS...

ONLY FOR THE PLUG NGK R7282 AND OTHER SMALL PLUGS. OK FOR THE TM K10C.

OTK CASTER TOOL AND REAR BUMPER ADJUSTER

Tool for OTK castor adjusters and rear bumper adjusting, just replace screws incase of break

SENZO MYCHRON 5 BRACKET FOR OTK

Mychron 5 possition protected against damage

PROFESSIONAL CHARGER LIPO BATTERY

 Imax B6AC 80W Rapid to Charge, Balance, Storage and Discharge, LiPo, LiFe (Rotax litium), Pb (lead standard), NiCd and NiMH Batteries.

FRONT LASER ALIGNMENT SYSTEM R3 KELGATE -...

Laser system to adjust the direction. Toe, caster & Camber. It is part of the complete kit that can be completed with rear lasers that work together.

KIT REAR LASERS R3 KELGATE - EAGLE EYE

Check easily if the chassis is bent, twisted or touched using the rear lasers separately and in conjunction with the front ones

LASER MASTERKIT COMPLETE R3 EAGLE EYE -...

Complete kit with all the laser accessories to make the adjustments and check if the chassis is bent. Contains chain laser, centering tool and steering lock

PROFESSIONAL CHAIN MEASSURING TOOL 219 - 428

KART COVER CRG

UNIPRO TYRE GAUGE UNITIRE V2 BLACK

BLACK

ALFANO LAPTIMER RED

BLACK